Vistaquest N7227V5 Manuel d'utilisateur télécharger pdf (Page 58)

– 58 –

✱ ZN 01 BACK

DOOR A

↑

Flashing Cursor if “6” is

pressed (system ready for

next word).

9. Press “6” to accept the selected

word.

Note:

If these are the only words

you are using for the descriptor,

press “8” instead of “6” to save them

in memory.

10. The two words in our example have

now been entered. Note, however,

that up to three words may be

entered (provided the number of

characters will fit on the screen).

Press “8” to save all words in

memory.

✱ ZN 01 BACK

DOOR

The “A” with the flashing cursor over

it will disappear, indicating that the

word(s) are stored in memory for that

zone, as shown in the display at the

left.

11. To enter a descriptor for the next

zone, press [

✱ ]

plus the desired

zone number (e.g.,

✱

02. The

summary display following step 4

previously will appear.

Now repeat steps 6 through 10 for

the descriptor for the next zone.

12. To exit the Alpha descriptor mode,

press “

✱

00” at the summary display.

Program Alpha ?

0 = No, 1 = Yes 00

This prompt will be displayed.

Alpha Pgm

13. Press “0”. This will be displayed.

14. Press

✱

99 to exit the programming

mode.

Alternate Method For Programming Zone Descriptors

When entering the Zone

Descriptors using this

method, the keypad keys

perform the following

functions:

[3] Scrolls both alphabet and

actual words in

ascending

alphabetical order.

[1] Scrolls both alphabet and

actual words in

descend-

ing

alphabetical order.

[6] Selects between alphabet

and actual word list; also

used to save words.

[8] Stores the zone descrip-

tion in memory.

1. Perform steps 1 through 5 of the previous method.

2. Note that the first letter of the alphabet appears after the zone number,

and that the zone number is automatically included with the description.

there already is a description for the zone

, the description will appear (with

no cursor, since this is a display mode).

To enter or change a description

press [

✱

] + Zone Number again. A flashing cursor will now appear.

Assume, for example, that the desired description for zone 1 is BACK

DOOR.

3. Select the first letter of the desired description (note that "A" is already

displayed).

Press key [3] repeatedly to advance through the alphabet (e.g., to "B"), or

key [1] to go backward. Then press [6] to display the first available word

beginning with the desired letter (e.g., BABY).

Next, press [3] repeatedly to move forward, or [1] to move backward, until

the desired word is displayed (e.g., BACK). Then press [6] to accept the

word and toggle back to the alphabet list.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 87 88

Commentaires sur ces manuels

Pas de commentaire

Vistaquest N7227V5 Manuel d'utilisateur Page 58

Commentaires sur ces manuels